Marvel Fusion has launched a wholly owned subsidiary focused on commercializing high-energy laser systems developed through its laser-driven fusion program. The new Munich-based company, Caelora, will develop diode-pumped pulsed laser systems for fusion energy and scientific research while also pursuing radiation-source applications across medical, industrial and security markets. The move gives Marvel Fusion a separate commercial path for technologies being developed around the far more demanding long-term requirements of inertial fusion energy.
The new company builds on laser technology developed through Marvel Fusion’s work with Pulsed Light Technologies, a subsidiary created by Germany’s Federal Agency for Breakthrough Innovation, SPRIND. That program was established to address one of the central engineering gaps facing laser-driven fusion: existing high-energy research lasers were not designed around the efficiency, repetition rate, maintainability and manufacturing scale required for power-plant operation. SPRIND has identified laser efficiency above 10% and repetition rates of at least 10 pulses per second as key development targets for commercially relevant fusion systems.

Marvel Fusion has launched Caelora to commercialize diode-pumped high-energy laser systems developed through its fusion program, creating a path toward scientific, industrial, medical and security applications while building the laser supply chain required for future fusion energy.
Caelora is taking that engineering base into a broader photonics market. Its current architecture uses diode pumping and advanced cooling to support pulse durations ranging from nanoseconds down to femtoseconds, with peak powers extending into the petawatt regime and average power output above the kilowatt level. Those characteristics place the systems in a different category from many conventional laboratory lasers, where high pulse energy or ultrashort duration may be demonstrated without the repetition rate, thermal management or operating lifetime required for sustained industrial use.
Moritz von der Linden, Co-Founder and CEO of Marvel Fusion, said: “We are developing the world’s most advanced high-energy lasers on our path to commercializing inertial fusion energy. Building a fusion power plant requires a laser supply chain that does not exist at industrial scale today. Caelora lets us create that supply chain, realize the value of these systems now, and learn from every laser we deliver into an industrial environment before the same technology goes into a power plant.”
The commercial strategy therefore addresses more than a separate revenue stream. Fusion places unusual demands on laser hardware because a practical power system cannot depend on one-off experimental shots. The lasers must operate repeatedly, efficiently and predictably while surviving high thermal and optical loads over long service intervals. That in turn changes the engineering around pump sources, cooling, optics, controls, diagnostics, beam delivery and component replacement. Developing those systems for external customers gives Caelora a way to accumulate operating data and manufacturing experience before comparable technologies are required at fusion-plant scale.
SPRIND’s own program reflects that same logic. Pulsed Light Technologies was established not simply to demonstrate laser physics, but to begin building the equipment, industrial partnerships and supply chains that future laser-fusion systems will require. The organization is working with German fusion developers including Marvel Fusion and Focused Energy while supporting technologies that can also produce intense x-ray, electron, neutron and other radiation sources for applications beyond fusion.
“High-energy ultrafast lasers have an impressive track record of enabling scientific breakthroughs, but most such systems are built as one-off research instruments, not as products. Caelora was established to change that. We are developing diode-pumped systems with industrial DNA, derived from the requirements of inertial confinement fusion – compact, reliable and built for continuous operation,” said Dr. Lutz Aschke, CEO of Caelora.
That distinction between an experimental laser and an industrial laser system is central to the commercialization effort. Performance metrics such as pulse energy, pulse duration and peak power remain fundamental, but a deployable platform also has to address wall-plug efficiency, thermal stability, repetition rate, serviceability, controls and reproducibility from one system to the next. Caelora’s development program is intended to bring those considerations into the architecture from the beginning rather than adding them after a research system has already been designed.
The company is also targeting applications where high-energy laser pulses can generate secondary radiation sources or drive processes that are difficult to achieve with conventional industrial lasers. Potential uses include scientific research, advanced materials work and radiation sources for medical, industrial and security applications. The same underlying architecture can be configured across different combinations of pulse energy, duration and repetition rate, giving Caelora a platform approach rather than a single fusion-specific laser design.
For the photonics industry, the larger development is the effort to close the gap between high-energy laser performance and industrial-scale operation. Fusion research has historically pushed laser systems toward extreme pulse energies and peak powers, but commercialization depends equally on reliability, repetition rate, efficiency and manufacturability. By separating the laser business into a dedicated company, Marvel Fusion is creating a route for those technologies to mature through real operating environments while an industrial supply chain develops around them.
About Caelora
Founded in 2026 as a wholly owned subsidiary of Marvel Fusion, Caelora is a Munich-based photonics company developing diode-pumped, high-energy pulsed laser systems for fusion energy, scientific research and radiation-source applications across medical, industrial and security markets. The company builds on laser technology developed through Marvel Fusion’s fusion program in cooperation with Pulsed Light Technologies (PLT), a subsidiary of Germany’s Federal Agency for Breakthrough Innovation, SPRIND. Caelora is developing configurable laser architectures spanning nanosecond to femtosecond pulse durations, with peak powers extending into the petawatt regime and average power above the kilowatt level. The platform combines diode pumping with advanced thermal-management approaches intended to support higher repetition rates and more sustained operation than traditional one-off high-energy research systems. The European Photonics Industry Consortium independently identifies Caelora as a developer of diode-pumped high-energy pulsed lasers and confirms its focus on moving the technology into fusion, research and secondary-radiation applications.
The underlying development program addresses several requirements that become increasingly important as high-energy lasers move from experimental facilities toward industrial operation, including electrical efficiency, repetition rate, cooling, reliability, serviceability and repeatable manufacturing. SPRIND’s PLT program is targeting fusion-relevant laser systems with efficiency above 10% and repetition rates of at least 10 Hz, while developing associated optics, diagnostics and other supporting technologies required for future power-plant-scale laser infrastructure.
Caelora is led by CEO Dr. Lutz Aschke, whose photonics-industry experience includes senior roles at TRUMPF, SCHOTT and LIMO. The company’s commercial strategy is intended to bring high-energy laser systems into external operating environments while building manufacturing and supply-chain experience that can also support future laser-fusion programs. For more information on Caelora and its high-energy laser technologies, please click here.
About Marvel Fusion
Founded in Munich in 2019, Marvel Fusion is developing laser-driven inertial fusion technologies based on high-intensity, ultrashort-pulse laser systems, advanced target concepts and integrated power-plant engineering. The company operates in Germany and the United States, with development activities spanning laser technology, fusion targets, laser-plasma interaction and the supporting systems required for a future fusion power plant. Independent Fusion Industry Association records also identify Marvel Fusion as a laser-driven inertial-confinement fusion company founded in 2019.
A major part of Marvel Fusion’s current development program is its partnership with Colorado State University on the Advanced Technology Lasers for Applications and Science, or ATLAS, facility in Fort Collins, Colorado. The approximately $160 million facility is being developed through a public-private partnership involving CSU and Marvel Fusion, with additional collaboration from U.S. federal agencies. Designed as a high-intensity, high-repetition-rate laser research center, ATLAS will bring multiple advanced laser systems together for research in fusion, high-energy-density physics and related photonics applications. Colorado State University reported in May 2026 that construction remained on track for substantial completion in December 2026.
Marvel Fusion also participates in the U.S. Department of Energy-supported RISE inertial fusion science and technology hub led by Colorado State University and SLAC National Accelerator Laboratory. In Germany, its laser-development work is supported through cooperation with SPRIND’s Pulsed Light Technologies program, which was established to develop high-efficiency, high-repetition-rate laser infrastructure needed by emerging laser-fusion systems. The company’s broader development strategy brings laser systems, targets and future power-plant technologies together rather than treating the laser as a standalone research instrument. Caelora extends that strategy by creating a separate route for high-energy laser technologies to mature through scientific and industrial applications while Marvel Fusion continues development of its fusion-energy program. To learn more about Marvel Fusion and its laser-driven fusion technologies, please click here.
Source/Photo Credit: Marvel Fusion
(Editor’s Note: All trademarks mentioned in this article, including company names, product names, and logos, are the property of their respective owners. Use of these trademarks is for informational purposes only and does not imply any endorsement.)
- Meet Corning - November 12, 2026
- Meet Freedom Photonics - November 9, 2026
- Meet LightPath Technologies - November 5, 2026

